send link to app

Watch Sensor


4.0 ( 4850 ratings )
Бізнесс Утіліти
Розробник: Shu En Chien
безкоштовно

Watch Sensor

Watch Sensor is a data collect and remotely control software. The user set the device ID and Password and the data from the “Cloud Gateway” will be collected and shown in Watch Sensor. The “Cloud Gateway” collects data from the sensor, PLC, HMI, equipment or controllers with RS-485 communication interface base on ModBus RTU protocol. There are 30 data monitored and one data to be alerted. After setting the alarm value and while the data is higher or lower than the setting value, the iPhone will ring or vibrate to notify the user and show the light to indicate the abnormal status. The current data cloud be shown the drawing line. The user also can remotely control the device to turn on/off the three switches on the cloud gateway device and get the switch status through internet. Watch Sensor let the user to get data, check data, alert and control the device anywhere, anytime.

Feature:
-Get 30 data from the cloud gateway through internet.
-Collect data from sensor, PLC, controller, HMI base on ModBus RTU protocol through RS-485.
-Show the current realtime data.
-Ring or vibrate while the data higher or lower than the setting value.
-Re-alert while the data is still abnormal.
-Remotely switch on/off the device through internet.
-Show the current data by drawing curve.

More information: http://www.a-sens.com/index.php?act=prod&main=12&sec=21